Repair

How to take off bike pedals without a pedal wrench? Guide to replace your bike pedals

How to take off bike pedals without a pedal wrench? When it comes time to take your bike pedals off, you realize that you don’t have your pedal wrench with you.

This can be a real pain if you’re not prepared, because the process of taking bike pedals off without a pedal wrench can be difficult.

We’ve got you covered. In this article, we’ll show you how to take off bike pedals without a pedal wrench in just a few simple steps.

How to take off bike pedals without a pedal wrench? Guide to replace your bike pedals
How to take off bike pedals without a pedal wrench? Guide to replace your bike pedals

Reasons that you should be able to your bike pedals

Reasons that you should be able to your bike pedals
Reasons that you should be able to your bike pedals

There are many reasons you might want to change your pedals. Maybe you’re upgrading to a new set of pedals, or perhaps you’re simply trying to clean your old ones. Regardless of the reason, it’s important to know how to take off bike pedals without a pedal wrench.

Without a pedal wrench, the process is a bit more difficult, but it can still be done. Here are the steps you’ll need to follow.

How to take off bike pedals without a pedal wrench?

How to take off bike pedals without a pedal wrench
How to take off bike pedals without a pedal wrench

Things to know before getting started

Things to know before getting started
Things to know before getting started

Right is wrong, lefty loosey

The first thing you need to know is that the right pedal is reverse threaded. This means that you’ll need to turn it to the left in order to loosen it. The left pedal, on the other hand, is standard threaded, so you’ll need to turn it to the right in order to loosen it.

Re-learn left and right

Since the right pedal is reverse threaded, it can be easy to forget which way to turn it. A good way to remember is by thinking “righty tighty, lefty loosey.” This means that you turn the right pedal to the left in order to loosen it, and you turn the left pedal to the right in order to loosen it.

Differentiate left and right pedals

There are a few ways to tell left from right pedals. The most common is by looking at the threads. The right pedal has a right-hand thread, while the left pedal has a left-hand thread.

Another way to tell them apart is by looking at the shape of the pedal. Most pedals will have a concave side and a convex side. The convex side should face up when you’re riding, and this side is usually on the right pedal.

Finally, some pedals will have an arrow or line that indicates which way to install them. Be sure to check your pedals before you begin so that you don’t accidentally install them backwards.

Identify the pedal axles type

There are two types of pedal axles: 9/16″ and 1/2″. The size of your axle will determine the size of the wrench you’ll need. A 9/16″ axle will require a 15mm wrench, while a 1/2″ axle will require a 14mm wrench.

If you don’t have a wrench that’s the right size for your axle, you can use a flat head screwdriver and a hammer instead.

Bike pedals removal tool you will need

Bike pedals removal tool you will need
Bike pedals removal tool you will need
  • Flat head screwdriver
  • Hammer
  • Rag or towel
  • Bike grease

Guide to take off bike pedals without a pedal wrench

Guide to take off bike pedals without a pedal wrench
Guide to take off bike pedals without a pedal wrench

Remove bike pedals from the Non-Drive Side

  • Start by placing your bike upside down on a stable surface. This will make it easier to access the pedals.
  • Next, take a look at the non-drive side of the bike (the left side if you’re looking at it from the front). You’ll see that the pedal is held in place by a large nut.
  • Take a flat head screwdriver and insert it into the space between the nut and the pedal. Apply pressure to the screwdriver with your hand until you feel the nut start to loosen.
  • Once the nut is loose, use a hammer to tap on the end of the screwdriver. This will help loosen the nut further.
  • Once the nut is completely loose, remove it by hand and set it aside.
  • The pedal should now be loose. You can remove it by simply pulling it away from the bike.
  • Inspect the threads on the pedal shaft and clean off any dirt or debris that may be present. Apply a generous amount of bike grease to the threads before moving on to the next step.

Remove bike pedals from the Drive Side

The process for removing the pedals from the drive side (the right side if you’re looking at it from the front) is similar to the process for the non-drive side.

  • Start by placing your bike upside down on a stable surface. This will make it easier to access the pedals.
  • Next, take a look at the drive side of the bike (the right side if you’re looking at it from the front). You’ll see that the pedal is held in place by a large nut.
  • Take a flat head screwdriver and insert it into the space between the nut and the pedal. Apply pressure to the screwdriver with your hand until you feel the nut start to loosen.
  • Once the nut is loose, use a hammer to tap on the end of the screwdriver. This will help loosen the nut further.
  • Once the nut is completely loose, remove it by hand and set it aside.
  • The pedal should now be loose. You can remove it by simply pulling it away from the bike.
  • Inspect the threads on the pedal shaft and clean off any dirt or debris that may be present. Apply a generous amount of bike grease to the threads before putting the pedals back on.

Next, we will guide you to replace your bike pedals.

Guide to replace your bike pedals

Guide to replace your bike pedals
Guide to replace your bike pedals

Begin by identifying the right and left pedals. The right pedal is the one that has a right-hand thread, while the left pedal has a left-hand thread. This is important to remember, as reversing the pedals will make it difficult to ride your bike.

With the bike still upside down, start by screwing in the left pedal (the one with the left-hand thread) by hand. Once it’s tight, use the wrench to tighten it further.

Do the same with the right pedal, being careful not to cross-thread it.

Once both pedals are tight, flip your bike over and test them out. Make sure they’re securely in place before you take it for a ride.

If you find that your pedals are still slipping, you may need to replace the pedals. Old pedals can become worn out and no longer provide a tight grip.

Pedal bearings and hardware

Pedals bearing may be serviceable or not, depending on the manufacturer. To check pedal bearings, grasp the pedal between your thumb and first two fingers and try to wiggle it side to side and in and out. There should be no play, but a small amount of resistance is normal. If there is excessive play or the pedal feels sloppy, it’s time for new bearings.

Pedal bodies often are made of aluminum, steel, or composite materials. The pedal threads are usually steel.

Checking the condition of your pedals is a good way to ensure that they’re in good working order and will last for many miles. Over time, pedals can become worn out and need to be replaced.

When replacing pedals, it’s important to use the correct size and type of pedal for your bike. Be sure to check with your bike’s manufacturer or a local bike shop before making any changes to your bike.

How to take off bike pedals with a wrench?

How to take off bike pedals with a wrench
How to take off bike pedals with a wrench

If you have a pedal wrench, use it to remove the pedals. The wrench will fit over the end of the pedal and provide extra leverage to loosen the nuts.

To remove the left pedal, place the wrench over the end of the pedal and turn it counter-clockwise. To remove the right pedal, turn the wrench clockwise.

Once the nuts are loose, remove them by hand and set them aside.

The pedals should now be loose. You can remove them by simply pulling them away from the bike.

Inspect the threads on the pedal shaft and clean off any dirt or debris that may be present. Apply a generous amount of bike grease to the threads before putting the pedals back on.

F.A.Q How to take off bike pedals without a pedal wrench?

How do I take the pedals off my bike wrench?

To take the pedals off your bike with a wrench, you will need to place the wrench over the end of the pedal and turn it in the opposite direction of the pedal. For example, to remove the left pedal, you would turn the wrench counter-clockwise. To remove the right pedal, you would turn the wrench clockwise. Once the nuts are loose, remove them by hand and set them aside. The pedals should now be loose. You can remove them by simply pulling them away from the bike.

Which way do you turn the pedals to take off a wrench?

From the top of the bike, the left pedal is removed by turning counter-clockwise and the right pedal is removed by turning clockwise.

What size wrench do you need to remove a bicycle pedal?

The size of the wrench you need to remove a bicycle pedal will depend on the size of the pedal.

What size is a pedal wrench?

Most pedal wrenches are a standard 9/16-inch size, but some may be larger or smaller.

Conclusion

Pedal wrenches can be expensive and hard to find, so what do you do if you don’t have one or can’t borrow one? Here are a few tips for taking off bike pedals without a pedal wrench. If these methods don’t work for you, there are still plenty of other ways to remove your bike pedals- just take your time and be careful not to damage the crank arms. How do you take your bike pedals off? Leave us a comment below!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button