How to change bike inner tube? Changing a bike inner tube can be difficult, especially if you’ve never done it before.
Not only is changing your bike’s inner tube a hassle, but it can also be dangerous if you don’t know what you’re doing. If you’re not careful, you could end up with a flat tire and no way to fix it.
Our guide on how to change a bike inner tube will walk you through the entire process step-by-step. We’ll show you how to find the right tools, remove the old inner tube, install the new one, and inflate your tires properly.
How to change bike inner tube?
Tools you may need
- Bike pump
- Spare tube
Step by step guide to change the inner tube on a bike tire
Take off the Wheel From your Bike
Shift the chain into the smallest cog on the cassette. This will give you more slack to work with and make it easier to remove the wheel.
Loosen the bolts that secure the tire to the frame or fork. You may need a wrench or Allen key to do this, depending on your bike.
Pull the wheel away from the frame or fork.
Remove the Inner Tube
Deflate the tyre
Now if the tyre isn’t already fully deflated, use your bike pump to let all the air out. This will make it much easier to remove the inner tube.
Unseat the tyre from the wheel
With the innertube deflated, squeeze the tyre at the point where it meets the wheel rim. This will help to unseat the tyre from the wheel, making it easier to remove.
Use your hand to remove the tyre
How to remove inner tube from bike? With the tyre unseated from the wheel, you should now be able to remove it by hand. Simply pull it away from the wheel rim, taking care not to damage or puncture the inner tube in the process.
Use tyre levers to remove the tyre (optional)
If you can’t remove the tyre by hand, you may need to use tyre levers. Start by inserting one of the levers under the tyre at the point where it meets the wheel rim.
Lever the tyre over the rim
With the first tyre lever in place, insert a second one a few inches away and lever the tyre over the wheel rim. Repeat this process until the entire tyre has been removed from the wheel.
Inspect the tube
Once you have removed the inner tube, take a close look at it to try and identify where the puncture is. You may be able to see and feel a bulge or hole in the tube. If the puncture is small, it may be difficult to find.
Replace the inner tube
With the old inner tube removed, it’s time to fit the new one. Start by finding the valve on the new tube and threading it through the hole in the wheel rim.
Fit a tyre with tyre levers (optional)
If the tyre is tight, you may need to use tyre levers to help get it over the wheel rim. Start by inserting one of the levers under the tyre at the point where it meets the wheel rim.
Inflate The Inner Tube
Once you have replaced the inner tube and fitted the tyre, it’s time to inflate it. Attach your bike pump to the valve and start pumping air into the tube.
Check for leaks
With the tyre inflated, check the wheel and tyre for any leaks. If you can see or hear any air escaping, deflate the tyre and check the inner tube for holes. Once you have found and patched the hole, inflate the tyre again.
Re-fit The Wheel
With the tyre inflated and all leaks fixed, it’s time to re-fit the wheel. Start by lining up the axle with the dropouts on the frame or fork.
Tighten The Bolts
Once the wheel is in place, tighten the bolts that secure it to the frame or fork. You may need a wrench or Allen key to do this, depending on your bike.
Test The Wheel
Before you ride off, spin the wheel and check that it’s running true. If the wheel is wobbling, loosen the bolts and re-position the wheel until it runs smoothly. Once you’re happy, tighten the bolts and you’re ready to go!
Next, we will have a look at some tips for changing bike inner tube.
Tips for changing bike inner tube
If you don’t have a bike pump, you can inflate the tyre using a gas station air compressor.
If you get a puncture while out riding, you can patch up the inner tube with a tire repair kit. These usually come with a small piece of rubber and some adhesive.
When removing the inner tube, take care not to damage or puncture it. If possible, avoid using tyre levers as they can sometimes cause damage.
When fitting the new inner tube, make sure that it’s fully inflated before you re-fit the tyre. This will help to prevent punctures.
When re-fitting the wheel, make sure that the axle is lined up with the dropouts on the frame or fork. If it’s not, you may damage the frame or fork.
When tightening the bolts that secure the wheel to the frame or fork, don’t over-tighten them. This could damage the threads and make it difficult to remove the wheel in future.
If you’re not sure how to change a bike inner tube, ask a friend or take your bike to a local bike shop. They will be able to help you out and may even do it for you.
F.A.Q How to change bike inner tube?
Can you change an inner tube without removing the wheel?
No, you will need to remove the wheel in order to change the inner tube.
What tools do you need to change an inner tube?
You will need a bike pump, a wrench or Allen key (depending on your bike), and a new inner tube.
How do you change an inner tube without tools?
If you don’t have any tools, you can take your bike to a local bike shop and they will be able to help you out.
How do you remove a bicycle tire inner tube?
To remove a bicycle tire inner tube, you will need to remove the wheel and then carefully take the tube out. Make sure not to puncture or damage it.
Changing a bike inner tube is not as difficult as it may seem. With the right tools and some practice, you can do it yourself without having to take your bike to a shop. Leave your tips and experiences below in the comments, or visit bigbuddymike.com for more information on how to change a bike inner tube and other bicycle maintenance tasks. Thanks for reading!